imc CANSAS measurement modules are perfectly complemented with an imc data logger - for example with an imc CRONOScompact or imc imc BUSDAQ.These are well-suited for use in, e.g., control device development or ECU testing where real-time acquisition and calculating of vehicle or field bus data is needed.
UTI-6 | T-10 | ENC-6 | |
---|---|---|---|
Channel number | 6 | 10 | 6 |
Sampling rate / channel | 1000 Hz | 100 Hz | 1000 Hz |
Bandwidth / channel | 400 Hz | 20 Hz | 2 MHz |
Galvanic isolation | |||
Sensor supply | |||
Input signals | |||
Voltage max. Voltage | 60 V | ||
Current 0 … 20mA | |||
RTD (PT100 … PT1000) | |||
NTC, resistance (5 ohm ... 100 kOhm) | |||
Thermocouple | |||
Frequency | |||
Distance | |||
Angle | |||
Speed | |||
RPM | |||
Time | |||
Socket | |||
LEMO | |||
Thermo |
imc CANSASfit-T-10
10 channel module for measuring temperatures
The T-10 module from the imc CANSASfit series is a 10 channel module for measuring temperatures with thermocouples.
Highlights:
- High temperature resistance
- Module operating temperature: -40°C to 125°C
- Robust housing
- Small and compact design
- Modules are connected mechanically and electrically with click-mechanism
- 24 bit A/D convertor
Typical applications:
In mobile applications, measurements in the engine compartment, around high temperatures and harsh environments.
imc CANSASfit-UTI-6
6 channel measurement amplifier for voltage, current and temperature measurements
The UTI-6 from the imc CANSASfit series is a 6 channel measurement amplifier that acquires analog signals, digitizes them, then outputs them via CAN.
Measurement variables:
- Voltage (25 mV to 60V)
- Current (20mA sensors)
- Temperature (PT100, PT1000, NTC)
- Resistance
Features:
- Per channel isolated measurement inputs, individual filter and ADCs
- Adjustable sensor supply (e.g., for active voltage-fed sensors)
- 400 Hz bandwidth with max. 1000 Hz sampling rate per channel
- Measurement ranges and sampling rates can be set per channel in steps of 1, 2, 5
- 24 bit A/D converter
Typical applications:
Robust measurement equipment for mobile use at high temperatures and in harsh environments. Ideal for vehicle and machinery testing where space is limited and conditions can be extreme, e.g., in the engine compartment.
- General voltage signals, incl. vehicle on-board voltages (up to 60V) and current measurements on external shunts (up to 50 mV)
- Active voltage-fed sensors
- Industrial sensors (20mA) for different physical variables
- Temperature measurements with resistance-based sensors (PTxx, NTC)
imc CANSASfit-ENC-6
Module for acquisition of frequency, rotation, position and angle counter signals
The ENC-6 module from the imc CANSASfit series offers 6 differential channels which can each be used for event counting, time measurement or a combination of event counting and time measurement. These operating modes enable capture of incremental counter sensors such as those used for measuring frequencies, RPM-values and velocities. The switching threshold and hysteresis are software configurable for the purpose of detecting events or impulses for incremental measurements.
imc CANSASfit-HISO-UT-6-3L
High voltage isolated 6-channel CAN-based measurement modulefor voltage, temperature (RTD) and resistance (NTC)
Within the imc CANSASf it (CANFT) module series,the HISO series offers particularly highly isolatedtypes that are specially designed for use in highvoltage environments.The model UT-6 allows the measurement of lowvoltages as well as temperature sensors on 6channels, which are on a high common mode levelor in environments with up to 1000 V voltage:
- Voltage (25 mV to 100 V)
- Temperature (PT100, PT1000)
- Resistance (e.g. NTC)
- MEMS accelerometers (5 V sensor supply)
Highlights
- Isolation: 1000 V (according to safety standard DIN EN 61010)
- High-voltage-proof special connectors"3L": 3 x LEMO.2P as common socket (2 channels at each 8-pin socket)
- 5 V sensor supply per-channel (8 mA), suited for MEMS accelerometers (imc AC series)
- Per-channel isolated measurement inputs, individual filtering and ADCs
- 400 Hz bandwidth at max. 1 kSps/channel sampling rate (CAN output rate)
- 24-bit digitization and internal processing CAN-output format selectable: 16-bit or FLOAT (24-bit mantissa)
- Click mechanism providing both mechanical and electrical coupling
imc CANSASfit-HISO-T-8-2L
High voltage isolated 8-channel CAN-based measurement module for thermocouples
Within the imc CANSASf it (CANFT) module series, theHISO series offers particularly highly isolated types thatare specially designed for use in high voltageenvironments.The model T-8 supports temperature measurement on8 channels with thermocouples (type K), which are on ahigh common mode level or in environments with up to1000 V voltage:
- Temperature with thermocouples type K
Highlights
- Isolation: 1000 V (according to safety standard DIN EN 61010)
- High-voltage-proof special connectors"2L": 2 x LEMO.2P as common socket (4 channels at each 8-pin socket)
- Per-channel isolated measurement inputs, individual filtering and ADCs
- Channel individual internal cold junction compensation
- 24-bit digitization and internal processing CAN-output format selectable: 16-bit or FLOAT (24-bit mantissa)
- Click mechanism providing both mechanical and electrical coupling
Typical applications
- Testing in e-mobility environments (e.g., electric and hybrid vehicles)
- Temperature measurement on high-voltage components of hybrid and electric vehicles, such as batteries,fuel cells and supply systems
- Environments where personnel safety has to be ensured